Automatic Control Of Tungsten Cemented Carbide To Improve Quality Professional Custom Pressure Sintering Furnace (Sinter HIP)
Suitable for sintering all kinds of cemented carbide products. Dewaxing, sintering and densification of Tungsten carbide can be completed in a single cycle at relatively low pressure.
When pressurized at sintering temperature, any residual pore or defects within the products are maximally eliminated, therefore greatly improving product’s strength and other mechanical properties.
Feature
The furnace is automatically-controlled with following functions: leak-testing (positive & negative pressure), dewaxing, vacuum sintering, process gas sintering, pressure sintering in Ar, fast cooling etc.
Code Rule GPSF ◇X◇-◇ MPa | Value of Pressur |
Effective Working Length (cm) 60, 90, 120, 180 | |
Effective Working Width (cm) 30, 40, 50, 55, 60 | |
Gas Pressure Sintering Furnac |
Technical Parameters
Model | Effective Zone(mm) | Effective Volume (L) | Max.Temp.(℃) | Pressure(MPa) | ultimate Vacuum(Pa) | Capacity(kg) |
GPSF30×60 | 300×280×600 | 50 | 1550 | 6(10) | 3 | 100 |
GPSF30×90 | 300×280×900 | 75 | 1550 | 6(10) | 3 | 150 |
GPSF40×120 | 400×400×1200 | 192 | 1550 | 6(10) | 3 | 400 |
GPSF50×180 | 500×500×1800 | 450 | 1550 | 6 | 3 | 900 |
Features
.High Temperature-uniformity
The distribution of heating power has been optimized to ensure temperature-uniformity during vacuum and HIP process.
High Temperature-uniformity ≤ ±5 ℃
Difference of Coercive Force < 0.4Kam
Difference of Cobalt Magnetic < 0.3%
.Overall Safety Protection
Safeguard devices are adopted and interlock is installed for safety
setup. The furnace system is safeguard properly in case of wrong
handling, over-pressure, over-temperature, water failure and power-cut.